![[]](/images/graphics/box_unchecked.png)
1.
BuckPuck™ LED Power Modules are a line of true current regulated drivers for powering LEDs. The BuckPuck™ line of LED drivers are the ideal choice for powering all types of high-brightness and high-power LED packages and LED arrays. The line of BuckPuck LED drivers exhibit high efficiency and require no external current limiting resistors or additional heat sinking for operation. Can dim connected LEDs using the internal 5VDC voltage reference and varying the control voltage.
- Accessory Type: Driver
- Dim Control: External
- Input Voltage DC: 5 ~ 32 VDC
- Type: LED Driver
- Connection Type: Wire Leads
- Driver Type: Buck
- Output Voltage DC: 0 ~ 32 VDC
Available Options
Output Rated Current: 350mA, 500mA, 700mA, 1000mA
2.
BuckPuck™ LED Power Modules are a line of true current regulated drivers for powering LEDs. The BuckPuck™ line of LED drivers are the ideal choice for powering all types of high-brightness and high-power LED packages and LED arrays. The line of BuckPuck LED drivers exhibit high efficiency and require no external current limiting resistors or additional heat sinking for operation.
- Accessory Type: Driver
- Dim Control: None
- Input Voltage DC: 5 ~ 32 VDC
- Type: LED Driver
- Connection Type: Wire Leads
- Driver Type: Buck
- Output Voltage DC: 0 ~ 32 VDC
Available Options
Output Rated Current: 350mA, 500mA, 700mA, 1000mA
3.
FlexBlock™ High Output Wide Range LED Power Modules are a line of true current regulated drivers for powering LEDs. The LUXdrive FlexBlock™ line of LED drivers are the ideal choice for powering all types of high-brightness and high-power LED packages and arrays.
- Accessory Type: Driver
- Dim Control: External
- Input Voltage DC: 10 ~ 32 VDC
- Type: LED Driver
- Connection Type: Wire Leads
- Driver Type: Boost
- Output Voltage DC: 0 ~ 48 VDC
Available Options
Output Rated Current: 350mA, 500mA, 700mA
4.
BuckBullet™ AC Driver is a constant current device that allows operation of LEDs from low-voltage AC power (8-24VAC). Its moisture-resistant design allows for outdoor use with landscape lighting systems. High-speed electronics allow it to be used with either magnetic transformers or 12VAC electronic transformers commonly found in accent lighting systems.
- Accessory Type: Driver
- Dim Control: None
- Input Voltage AC: 8 ~ 24 VAC
- Connection Type: Wire Leads
- Driver Type: Buck
- Type: LED Driver
Available Options
Output Rated Current: 350mA, 500mA, 700mA
5.
BuckBlock™ High Output Wide Range LED Power Modules are a line of true current regulated drivers for powering LEDs. The LUXdrive BuckBlock™ line of LED drivers are the ideal choice for powering all types of high brightness and high-power LED Packages and arrays. BuckBlock™ LED drivers provide high efficiency and require no external current limiting resistors. Dimming circuit uses common 10V control voltage.
- Accessory Type: Driver
- Dim Control: External
- Input Voltage DC: 10 ~ 32 VDC
- Type: LED Driver
- Connection Type: Wire Leads
- Driver Type: Buck
- Output Voltage DC: 10 ~ 32 VDC
Available Options
Output Rated Current: 1000mA, 1400mA, 2100mA
6.
DynaOhm™ by LUXdrive™ is a semiconductor based resistor that provides constant current to LEDs and strings of LEDs. It also reduces current to the LED(s) when the device temperature rises. It is the perfect replacement for a fixed resistor in circuits where the input voltage varies. The simple two wire DynaOhm™ eliminates complicated math from low power LED circuits. The DynaOhm™ can drop up to 24V (25mA model) allowing for use with 24VDC automotive systems and one LED.
- Accessory Type: Driver
- Type: LED Driver
Available Options
Output Rated Current: 20mA, 25mA, 30mA
7.
A019 0-10 volt DC low voltage dimming control for high power LEDs, 3021/3023 BuckPuck™ LED drivers, and other compatible drivers or light engines with a 0-10V current sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with knob, mounting plate, mounting screws, and wire nuts.
- Accessory Type: Driver
- Type: LED Driver
- Output Voltage DC: 0 ~ 10 VDC
8.
BuckToot™ LED Power Module is a true constant – current regulated LED driver. Unlike standard power supplies, which deliver a fixed voltage to the output, the BuckToot™ LED driver is designed to reliably vary the output voltage as required to deliver a stable constant current to the LED(s). The BuckToot exhibits very high efficiency and does not require external current limiting resistors or additional heat sinking.
- Accessory Type: Driver
- Dim Control: None
- Input Voltage DC: 5 ~ 28 VDC
- Output Voltage DC: 0 ~ 28 VDC
- Connection Type: Wire Leads
- Driver Type: Buck
- Output Rated Current: 350mA
- Type: LED Driver
9.
BuckPuck™ LED Power Modules are a line of true current regulated drivers for powering LEDs. The BuckPuck™ line of LED drivers are the ideal choice for powering all types of high-brightness and high-power LED packages and LED arrays. The line of BuckPuck LED drivers exhibit high efficiency and require no external current limiting resistors or additional heat sinking for operation.
- Accessory Type: Driver
- Dim Control: None
- Input Voltage AC: 7 ~ 24 VAC
- Output Voltage DC: 0 ~ 32 VDC
- Connection Type: Wire Leads
- Driver Type: Buck
- Input Voltage DC: 6 ~ 32 VDC
- Type: LED Driver
Available Options
Output Rated Current: 350mA, 500mA, 700mA, 1000mA
10.
MicroPuck™ is a versatile, compact solution for powering (1) High-Power LED or strings of 5mm (T 1-3/4) LEDs,from low DC voltages efficiently and with stability. MicroPuck provides maximum illumination to LED(s) while still mimicking the light drop-off of an incandescent bulb, which dims as the batteries are used up. Unlike an incandescent bulb, the driver’s current consumption drops at very low voltages, allowing usable light to be produced by the LED much longer than conventional flashlights.
- Accessory Type: Driver
- Dim Control: None
- Input Voltage DC: 0.8 ~ 3 VDC
- Output Voltage DC: 0 ~ 8 VDC
- Connection Type: Wire Leads
- Driver Type: Buck/Boost
- Output Rated Current: 600mA
- Type: LED Driver
